Manganese ore processing jig manganese mining jigger manganese separation jigging machine
OUR FAITH: CUSTOMER IS NO. 1
Our Saw-tooth Wave Ladder Jigger is a new type of energy saving and high efficient gravity separation equipment and developed based on the traditional Sine Wave Jigger. The difference between Saw-tooth Wave Ladder Jigger and Sine Wave Jigger is that the pulsation curve for jigging is saw-tooth wave shape, with speedy upward flow and slow downward flow. Bed layer is elevated integrally and slowly dropped with a long effective loose time, allowing significant increase of handling capacity for unit screen surface, decrease of lower limit of grain size recovery and large save of make-up water for undersize fraction.
Industrial tests carried our of Saw-tooth Wave Ladder Jigger and Sine Wave Jigger for comparison showed that the recovery rate for operation of Saw-tooth Wave Ladder Jigger is raised by Sn: 3.01%, W: 5.5%, Pb: 1.63%, Zn: 2.04%; The water consumption reduces 30%-40% with water consumption being decreased by 30-40%. The area reduces 1/3 and the stroke may adjust also.
Application
Ore dressing of our Saw-tooth Wave Ladder Jigger is capable of handling almost full sizes of mineral materials other than very fine material. It features simple process operation, heavy duty equipment handling capacity with final products being obtained through one time separation. They can achieve a good result in processing such as placer gold, tantalum-niobium, titanium, tungsten, iron, tin, hematite, cope, manganese, barite, zirconium and chrome etc.
Model |
Hutch |
Diaphragm |
Feeding Size
(mm) |
Amount of make-up water (m 3 /t) |
Make-up water pressure
(Mpa) |
Capacity
(t/h) |
Power
(kw) |
Dimensions
(mm) |
Weight (Kg) |
Shape |
Area
(m 2 ) |
Stroke (mm) |
Frequency of Stroke
(r/min) |
JT0.57-1 |
Trapezoid |
0.57 |
M128.5- 12
M1710- 17 |
80-180 |
< 6 |
1-3 |
≥ 0.05 |
1-2.5 |
1.5 |
1550× 780× 1530 |
610 |
JT1-1 |
Trapezoid |
1.04 |
< 10 |
1-3 |
2-4 |
2.2 |
2270× 1110× 1890 |
900 |
JT2-2 |
Rectangle |
2.28 |
< 10 |
1-3 |
4-8 |
3 |
3225× 1550× 2050 |
1640 |
JT3-1 |
Trapezoid |
3.3 |
M15
M20
M25 |
80-120 |
< 10 |
1-3 |
6-10 |
5.5 |
3180× 2000× 3030 |
3260 |
JT5-2 |
Trapezoid |
4.86 |
< 10 |
1-3 |
10-15 |
7.5 |
3600× 2000× 2600 |
4500 |
JT1.5-2 |
Rectangle |
1.53 |
M25
M30 |
80-120 |
< 30 |
1-2 |
5-8 |
3 |
3200× 1550× 2050 |
1520 |
JT4-2 |
Rectangle |
4.33 |
< 30 |
1-2 |
10-15 |
7.5 |
3600× 1850× 2600 |
4600 |