Features
* Automatic operation and automatic discharging
* Continuous work
* High concentrating ratio and high recovery
* Steady recovery performance
* Environmentally friendly(requires no chemical additives or reagents)
* Low water and electricity requirements
* Low production costs, durable wear parts, minimal maintenance requirements
* Compact design requiring less space, easy merged into the existing mining processing
* Quick payback on investment, typically lass than half year
Descriptions
Centrifugal gold concentrator is a relatively new type of gravity concentration apparatus. The machines utilise the principles of a centrifuge to enhance the gravitational force experienced by feed particles to effect separation based on particle density. The key components of the unit are a cone shaped "concentrate" bowl, rotated at high speed by an electric motor and a pressurized water jacket encompassing the bowl. Feed material, typically from a ball mill discharge or cyclone underflow bleed, is fed as a slurry toward the centre of the bowl from above. The feed slurry contacts the base plate of the vessel and due to its rotation, is thrust outward. The outer extremities of the concentrate bowl house a series of ribs and between each pair of ribs is a groove. During operation the lighter material flows upward
over the grooves and heavy mineral particles (usually of economic value) become trapped within them. Pressurized water is injected through a series of tangential water inlets along the perimeter of each groove to maintain a fluidized bed of particles in which heavy mineral particles can be efficiently concentrated.
Centrifugal gold concentrator was patented in China. It is an efficient equipment for recovering free gold in all particle size ranges, specially for recovery of fine gold which is lost during the operation of the gravitational concentrators(sluice boxes and jigs). It can be used not only for placer gold mining, but also for hard rock mining to recover the natural gold, replacing amalgamation, and recover gold from the old tailings.
Application shows that the recovery can be as high as 99%, and the concentrating ratio is up to 1,000 times. In recovering the natural gold in lode ore with size -0. 074mm, the gold is up to 98%, For 0.04mm in particle size, the gold recovery is 97%.
Aim at solve discontinuous work, complicated stop washing operations and waste manpower etc these shortcomings of older model products, our company developed automatic discharging system, now our new concentrators can be fully automated. No longer needed stop the concentrator and wash concentrates by manpower, only needed push start and stop buttion on the antomatic control system to complete all works. Because whole process is closed operation, it can avoid man-made concentrate loss. Besides, our concentrator adopt soft materials at shock-absorbing places, it can effectually decrease negative effects issued from the vibration, and increase of service life.
Technical Specifications
| Model |
STLB20 |
STLB30 |
STLB60 |
STLB80 |
STLB100 |
| Feeding Capacity (T/h) |
0-0.6 |
2-3 |
8-12 |
40-45 |
60-80 |
| Fluidization Water Required (m3/h) |
2-3 |
3-5 |
7-10 |
30-36 |
50-60 |
| Slurry Water Required (m3/h) |
1.5-4 |
5-7 |
8-12 |
40-45 |
60-80 |
| Feeding Density (%) |
0-50 |
0-50 |
0-50 |
0-50 |
0-50 |
| Feeding Size (mm) |
0-3 |
0-3 |
0-5 |
0-5 |
0-6 |
| Concentration Cleaning Up Cycle |
Vein gold 1-3 Hours Placer gold:2-6 Hours |
| Concentrate Weight (Kg) |
2 |
3-5 |
10-20 |
40-50 |
70-80 |
| Power Requirements (Kw) |
0.75 |
1.5 |
4 |
11 |
18.5 |
| Approximate Shipping Weight (Kg) |
205 |
380 |
1100 |
2300 |
3700 |
| Approximate Crated Shipping Dimensions (mm) |
914×700×900 |
1160×885×1165 |
1820×1450×1700 |
2520×1900×2020 |
2713×2169×2267 |
FAQ:
1. Q: Can I visit your factory?
A: Yes. Many domestic and overseas customers visited our factory every year.
2. Q: What about the warranty of your equipment? Do you supply spare parts?
A: Our warranty is one year(12 months), and we can supply spare parts also.
3. Q: Do you provide after-sales service?
A: Yes. We have a professional after-sale service team to promptly and thoroughly solve your problems.
4. Q: Do you provide equipment operation training?
A: Yes. We can send professional engineers to the working site for equipment installation, adjustment, and operation training. All of our engineers have passport.
5. Q: Do you provide producution flow chart?
A: Yes. Our experienced engineers are specialized in designing process flow for various ores beneficiation, including iron ore, tin ore, copper ore, gold ore, lead zinc ore, manganese ore, etc.
6. Q: Can you test our sample ore?
A: Yes. You can send your samples to us for testing and analysis.
7. Q: Have you made the whole ore dressing lines?
A: Yes. We have made many large&small scale ore dressing lines at home and abroad.
For more details, please send me inquiry below, we will reply you within in 24hour,or you can call me
Audited Supplier 
){kind=link}
){kind=link}