* Automatic operation and automatic discharging
* Continuous work
* High concentrating ratio and high recovery
* Steady recovery performance
* Environmentally friendly(requires no chemical additives or reagents)
* Low water and electricity requirements
* Low production costs, durable wear parts, minimal maintenance requirements
* Compact design requiring less space, easy merged into the existing mining processing
* Quick payback on investment, typically lass than half year
Centrifugal gold concentrator is a relatively new type of gravity concentration apparatus. The machines utilise the principles of a centrifuge to enhance the gravitational force experienced by feed particles to effect separation based on particle density. The key components of the unit are a cone shaped "concentrate" bowl, rotated at high speed by an electric motor and a pressurized water jacket encompassing the bowl. Feed material, typically from a ball mill discharge or cyclone underflow bleed, is fed as a slurry toward the centre of the bowl from above. The feed slurry contacts the base plate of the vessel and due to its rotation, is thrust outward. The outer extremities of the concentrate bowl house a series of ribs and between each pair of ribs is a groove. During operation the lighter material flows upward
over the grooves and heavy mineral particles (usually of economic value) become trapped within them. Pressurized water is injected through a series of tangential water inlets along the perimeter of each groove to maintain a fluidized bed of particles in which heavy mineral particles can be efficiently concentrated.
Centrifugal gold concentrator was patented in China. It is an efficient equipment for recovering free gold in all particle size ranges, specially for recovery of fine gold which is lost during the operation of the gravitational concentrators(sluice boxes and jigs). It can be used not only for placer gold mining, but also for hard rock mining to recover the natural gold, replacing amalgamation, and recover gold from the old tailings.
Application shows that the recovery can be as high as 99%, and the concentrating ratio is up to 1,000 times. In recovering the natural gold in lode ore with size -0. 074mm, the gold is up to 98%, For 0.04mm in particle size, the gold recovery is 97%.
Aim at solve discontinuous work, complicated stop washing operations and waste manpower etc these shortcomings of older model products, our company developed automatic discharging system, now our new concentrators can be fully automated. No longer needed stop the concentrator and wash concentrates by manpower, only needed push start and stop buttion on the antomatic control system to complete all works. Because whole process is closed operation, it can avoid man-made concentrate loss. Besides, our concentrator adopt soft materials at shock-absorbing places, it can effectually decrease negative effects issued from the vibration, and increase of service life.
|Feeding Capacity (T/h)||0-0.6||2-3||8-12||40-45||60-80|
|Fluidization Water Required (m3/h)||2-3||3-5||7-10||30-36||50-60|
|Slurry Water Required (m3/h)||1.5-4||5-7||8-12||40-45||60-80|
|Feeding Density (%)||0-50||0-50||0-50||0-50||0-50|
|Feeding Size (mm)||0-3||0-3||0-5||0-5||0-6|
|Concentration Cleaning Up Cycle||Vein gold 1-3 Hours Placer gold:2-6 Hours|
|Concentrate Weight (Kg)||2||3-5||10-20||40-50||70-80|
|Power Requirements (Kw)||0.75||1.5||4||11||18.5|
|Approximate Shipping Weight (Kg)||205||380||1100||2300||3700|
|Approximate Crated Shipping Dimensions (mm)||914×700×900||1160×885×1165||1820×1450×1700||2520×1900×2020||2713×2169×2267|
Why choose our company machine?
1. We are factory (NOT Dealer)
All machinery from Well-tech international equipment Mining Machinery Manufactory are made by ourselves, No trade company make
Commission(many trade companies do not produce the machinery),the lower price with the same goods, good quality, after service can be assured (after service of trade companies will get help from factory).
So please buy from factory
2. We will do our best to satisfy every customer's needs
Producing high-quality and reliable machines is our first priority, because we know that our success depends entirely on the satisfaction of our customers. We never give-up quality to save cost.
3. Training & service
Training is FREE to every customer. Whenever you need us, for installation, maintenance, or proper use of our company machines, we will be right there for you. In addition, we provide one-year warrantee to make sure your machine runs consistently. We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.
4. If you are new for this business, I will help you
Many thanks for your trust; we can provide you with the pre-services of design scheme for complete production lines, spot inspection and operator training according to your demands and the conditions of applied spot, we can help you choose the right equipments, drilling rig, Loader, trucks, excavators and so on
5. We will recommend a suitable type for you and send you a best quotation
1) Pre-sale service: Freely provide project designing, process designing, choosing suitable equipment for you.
2) Medium-sales service: Accompany you to complete the acceptance of the equipment, draft the construction scheme and detailed process, and complete process of export
3) After-sales service: We sent engineer to the scene to guide installation, debugging and training operators.
If you are interested in our products, Please through below method contact us, or welcome come to our factory visit!