Suice Box Gold Mining Sluice Mineral Separation Equipment Clean

• Customization: Available
• Type: Gravity Separator
• Voltage: 380V
• Model NO.: FGS-12/FGS-15
• Weight: 1T
• Material: Carbon Steel
• Certification: ISO9001:2008
• Energy Saving: Energy Saving
• Warranty: 1 Year
• Color: Blue
• Customized: Customized
• Condition: New
• After-sales Service: Supply
• Application: Alluvial Gold
• Feeding Size: -20mm
• Slurry Density: 30%
• Water Required: 50-80m3/H
• Slope Angle for Installation: 6-7 Degree
• Concentration Cleaning up Cycle: 4 Hours
• Transport Package: Nude Load in Container
• Specification: 3200*1200*730
• Trademark: GanDong
• Origin: Jiangxi
• HS Code: 84741000
• Production Capacity: 30sets/Month

Product Description

      Gold vibrating Sluice box for recovery placer gold mining equipment machinery


Vibrating sluice box is a new type of placer gold separation equipment developed on the basis of ordinary fixed gold sluice box, mainly used for the separation of placer/alluvial gold.
Descriptions
The vibrating gold sluice is composed by the mine tank, sluice box, rubber plate, push frame, lifting device, transmission and motor etc.

Most of gold exists as the micro fine gold in the nature. The fixed sluice box and gold rush grass are suitable for coarse gold, But not the micro fine gold. The fine gold is easy to floating on the water and discarded as tailings.

How to recycling the micro fine gold effectively? Vibrating sluice has motor power, vibrating frequency with 28-30 per minutes, small angle installation slope,water flow is lower, thus micro fine gold easily deposition. Grooved sluice box has new designed grid and riffles, causing lots of eddy currents increasing the gold separation time as well as polishing and washing the gravel and solids.

Features: Vibrating gold sluice combines the advantages of gold carpet sluice box and jig machine, overcoming the disadvantages of easy solidification in carpet sluice box and high production rate in jig machine. It basically retains the original characteristics of the fixed carpet sluice box, and replaces the original iron bottom plate with a rubber bottom plate. In addition, a simple eccentric drum mechanism is added to make the rubber bottom plate perform up and down reciprocating motion, and the diaphragm between each slide is similar to that of a jigger.

Working principle: Chute gold mining utilizes the difference in specific gravity between gold and sand. When the slurry flows through the chute, the heavy gold precipitates at the bottom layer, while the sand, which has a smaller specific weight, floats at the top layer and is discharged from the working area with the water flow. The bottom plate of the drum chute is made of rubber plate, and mechanical drum is used to slowly drum the bottom plate, overcome sediment compaction, and periodically drum to complete layering and sand removal, thereby improving the net selection rate.

Advantages: The drum chute has a very good effect on capillary gold and thin skin gold, and has a simple structure, reliable operation, less faults, low energy consumption, and low water consumption. It is a powerful equipment for selecting sand gold mines. It effectively overcomes the phenomenon of chute compaction and reduces sedimentation, significantly improving the recovery rate of fine-grained gold.

APPLICATION:

1. Reasonable structural design, convenient 
for transporting;

2. High degree of automation, Multi-machine joint working high gold handling capacity with the daily capacity up to 2000m3
 

3:Suitable for various areas, washing and separation are excellent in muddy areas of mines; It can also be suitable for processing minerals that may contain gravels and 

boulders;

4. Applicable to recycling bar gold, nuggets, slices and gold particles;

5. High degree of washing and recovery rate.

Technical Specifications

Modle	GD-12	GD-15
Dimension (mm)	3200x1200x730	4000x1500x730
Capacity (m³/h)	20-25	30-35
Feeding size (mm)	<20	<20
Slurry density (%)	30	30
Water required (m³/h)	40-50	60-80
Motor power (KW)	Driving motor 1.1kw Lifting motor 0.8KW	Driving motor 2.2kw Lifting motor 0.8KW
Recovery (%)	85	85
Frequency (shift/min)	28-30	28-30
Slope angle for installation	6°-7°	6°-7°
Concentration Cleaning Up Cycle (h)	4	4
Weight (kg)	750	1100