5LL-400/600/900/1200
Every year we build and sell more than 1000 sets SILICA SAND WASHING PLANT SPECIAL spiral chute separators to all over the world.
Applications
It has been used in to enrichment the particle size 0.3-0.02 millimeters fine grain like iron, tin, chromite, ilmenite, tungsten, zinc, tantalum-niobium, gold, coal, monazite, rutile, zircon and other low-grade ores. The non-metallic minerals which have a big enough specific gravity difference.
Bangladesh Silica Sand Washing Spiral Chutes Separator, they bought other suppliers spirals but not good effect, then come to us and buy ours. When they receive our special spiral chutes for silica sand, they change to ours and get very good effect. They are ready to change all of their other spirals this year
We build the steel frame according to their site dimensions, so when they receive, only need to put them on, very convenient and easy.
Another India client's 100tph silica sand washing plant, totally they bought 192set 5LL-600 spiral chutes from us, two layers, each layer with 96set
Features
1. Reasonable structure and small occupation area
2. High recovery, high efficiency, and precise separation
3. Non-required power
4. Light in weight, anti corrosion, rust and wear resistant
5. Simple installation and Minimal maintenance requirements
6. Low operating cost and long working life
7. Reliable running with minimal operator attention
8. Strong adaptability to fluctuation of feeding amount, density, size and grade
9. The surface of corundum forms strong friction the concentration effect surpass plastic surface
Descriptions
Spiral concentrator is our company's concentrating experienced scientific product, which is the best concentrating equipment, especially for concentrating sand ore in beach, riverside, seashore and stream.
The product is made of the fiberglass lined with wear-resistant polyurethane and corundum cover; The advantages are light, moisture proof, anti-rust, wear proof, anti corrosion and no noise, properly suitable for the different feeding particle sizes and grades. It is the domestic advanced level, the new highly effective equipment.
Technical Specifications
Our company uses the newest design and a complete set of technology organization produced and strict quality testing to guarantee each specification of spiral separator qualified.
We make the serialized with a special kind of grooved spiral separator to be selected by colored, ferrous metal mine, coal chemical industry, coal dressing, sulfur factory as well as the scientific research, the design department, the colleges and universities test chamber.
Provide high quality, best service and competitive price mining plants with flowchart and design diagram. Such as shaking table, jig, gold trommel, gold sluice, rotary screen, sand washer, spiral chute etc which passed ISO9001: 2008 Certification.
We can make a special mineral processing approach for you with least cost & simplest way. We also provide all small/lab testing mining equipment, welcome to contact me for the details.
Our higher quality:
-Thicker spiral blade's carborundum, better wearing layer;
-More layers of glass fabric, ours are 4 layers, other factories is only 2 layers;
-Stock-pan's steel plate is 3mm thickness, other factories are only 2mm.
| Model |
5LL-2000 |
5LL-1500 |
5LL-1200 |
5LL-900 |
5LL-600 |
5LL-400 |
| Spiral Diameter(mm) |
2000 |
1500 |
1200 |
900 |
600 |
400 |
| Spiral Pitch(mm) |
1200 |
720/540 |
900/720 /540 |
675/540 /405 |
450/360 /270 |
240/180 |
| Starts |
3 |
4 |
4 |
4 |
2 |
2 |
| Feeding Sizes (mm) |
4-0.04 |
0.8-0.037 |
0.3-0.03 |
0.3-0.03 |
0.2-0.02 |
0.2-0.02 |
| Feeding Density (%) |
20-45 |
30-60 |
25-35 |
25-55 |
25-55 |
25-55 |
| Capacity (t/h) |
15-40 |
6-8 |
4-6 |
2-3 |
0.4-0.8 |
0.15-0.2 |
Dimension
(mm) |
Length |
2300 |
1560 |
1360 |
1060 |
700 |
460 |
| Width |
2300 |
1560 |
1360 |
1060 |
700 |
460 |
| Height |
6500 |
5230 |
5230 |
4000 |
2600 |
1500 |
| |
| Weight(Kg) |
1100 |
800 |
600 |
400 |
150 |
50 |
Q: What Information should customers give to us?
- If rock ore, max feeding size? Capacity?
2) If alluvial/placer ore,contain sticky clay ore? If yes, more than 30% or not? and -5mm materials percentage? Capacity? Mineral elements and content?
Q: Can we send the mineral samples to your company, let your company run the ore-dressing experiments test for us?
A: Yes, we have a laboratory equipped with complete mining equipment which including jaw crusher, hammer mill, ball mill, jig, gold centrifugal concentrator, spiral chute, slurry pump, mixing tank, shaking table, dry magnetic separator, wet magnetic separator, three disc magnetic separator, electric separator etc. So we can run the ore-dressing experiments for our customers. After the test, we will based on the results to give you the reasonable flowchart, suitable solution and equipments selection. etc.
Q: How long is the guarantee of your equipments? Does your company supply the spare parts?
A: The warranty period of is one year, if break during this guarantee period, we need to replace new one for you AT NO COST. And of course we will supply the spare parts for you for life-long time at lowest cost.
Q: If i need the complete mineral processing line. Can you help us build it?
A: Yes, we can help you combine a complete mineral processing line. and give you related professional advices as long as you need.
There is a rich experienced engineers team of us, these 12 engineers always fly out of China to install, debugging our equipments on site and trainning the buyer's staff. --- PRE-SALE SERVICE ---1.Based on clients' request and budget, our experts will strictly make efficient, reliable solutions accordingly;
2.Mine sample testing is available, we welcome the customer send the sample to us for testing by courier, or, the customer take the sample to our factory for testing;it's free
3. Design and provide the complete processing flowchart;
4. Design & manufacturer products according to clients' demands.--- AFTER-SALE SERVICE ---1.Pre-check and test the products before delivery;
2.Deliver the whole plant design for our clients which including infrastructure, electrical system and pipeline system design;
3.Trace the status of the shipping until the products received;
4.Prepare required documents to let clients pass custom clearance;
5.Dispatch experts to carry out below service on site:
1) Installation & debug of the machinery
2) Train the first-line operators & technical personnel
3) Carry out any other service clients may need
6. Provide technical exchanging & spare parts for life-long term---
ONE STOP SOLUTION ---
1.Starting by running the mineral beneficiation experiment. To provide our clients with the best solution accordingly;
2.Besides supply the flowchart design & equipment, we also provide the infrastructure design; Electrical & pipeline system design, etc. To help our clients complete the design of the whole plant;
3.After the installation, debugging of the equipment, the official production will also be guiding by our experienced engineers on site, to guarantee the output minerals perfectly meet your demands.
Why Choose Us?-Quality: Guarantee
-Delivery: On Time
-Communication: In Time
-After-Sales Service: Excellent
-Engineer Team: Professional & more than 20 years experience on site
-Price: Competitive
Welcome you visit our factory when you are free, I will arrange our driver to pick you up from Airport for free and book hotel for you in advance.
Well-Tech International Mining Equipment
We have 7 big workshops, and one professional full equipped mineral testing laboratory. Our laboratory has jaw crusher, hammer crusher, ball mill, spiral chute, jig, gold centrifugal concentrator, shaking table, slurry pump, mixing tank, wet/dry magnetic separator, electric separator etc. Our equipments have been exported to more than 68 countries up to now.
+86 13517973057
){kind=link}