When flotation machine works, slurry is inhaled from the bottom of the cell to the space between impellers. Meanwhile, the low-pressure air send by fan is sent to this area through the air distributor in the hollow shaft. After sufficient mixing, the slurry is pushed out by the impeller, and then goes to the whole cell. When the froth rises to the stable level, after the enrichment processing, froth overflows to the froth trough from the overflow weir. Another part of ore slurry flows to lower part of impeller for the re-mix with air. The remained slurry flows to the next cell until becomes tailing.
XCF Cell's Features:
It has the similar structure and performance with XCF cells and only the difference is the stator on the impeller to be a negative pressure zone. Pulp is sucked automatically but higher power consumption.
Note:
Mechanical agitation, no air inhalation but pulp sucked automatically.
It is combined with KYF Cells to be group as a suction cell.
KYF Cells' Feature
Impeller is a cone shape with the backward inclined blades, strong agitation and simple structure.
Many air distributors are equipped on the impeller cavity, air disperse very well and well mixing of the air and pulp.
Utype tank is made and lower sand settlement.
The diameter of the impeller is smaller thus lower peripheral speed.
Performance features
Lower power consumption and saving 30-50% energy
Well floated particles and higher recovery.
Light wearing of the spare parts so the service life of them are extended.
Note:
Mechanical agitation, no air inhalation and no pulp sucked automatically.
It is combined with JPF Cells as the direct cells.
Application:
It is widely used in enrichment for non-ferrous metals, black metals and non-metals in medium and big flotation factories for the roughing and scavenging concentration.
){kind=link}