Saw-tooth Wave Jig Feature
1. Suitable for roughing and desliming
2. High capacity,High concentration ratio and high recovery
3. Can achieve a good result in processing such as placer gold, tungsten, iron, tin, hematite, cope, tantalum-niobium, titanium, manganese, barite, zirconium, chrome and gemstone etc.
4. Fabricated with highest quality material
5. The pulsation curve is saw-tooth wave shape facilitate heavy mineral to settling
6. Saving water 30-40% than ordinary jig
7. The pulsation speed very easy adjusted by regulator
8. Easy to install, operate and maintain
Saw-tooth Wave Jig
Descriptions
It is a new type of energy saving and high efficient gravity separation equipment and developed based on the traditional Sine Wave Jig. The difference between Saw-tooth Wave Jig and Sine Wave Jig is that the pulsation curve for jigging is saw-tooth wave shape, with speedy upward flow and slow downward flow. Bed layer is elevated integrally and slowly dropped with a long effective loose time, allowing significant increase of handling capacity for unit screen surface, decrease of lower limit of grain size recovery and large save of make-up water for under size fraction.
In practice, contrast of Saw-tooth Wave Jig and Sine Wave Jig shows up raises of recovery of Saw-tooth Wave Jig: Sn: 3.01%, W: 5.5%, Pb: 1.63%, Zn: 2.04%.
We are professional beneficiation and separating machine manufacturer. Can supply all kind of mining equipments, like Trommel, Sluice, Hopper, Conveyor, Rolling Sieve, Shaking Sieve, Centrifugal Concentrator, Jigging sluice, Gold carpet, etc...Welcome to contact us for more details.
We can make a special mineral processing approach for you with least cost & simplest way.
We can provide the most suitable whole set equipments for your ore.
We can provide you the best price & the best service.
We also provide all small/lab testing mining equipment, welcome to contact me for the details
| Model |
Hutch |
Diaphragm |
Feeding Size
(mm) |
Amount of make-up water (m 3 /t) |
Make-up water pressure
(Mpa) |
Capacity
(t/h) |
Power
(kw) |
Dimensions
(mm) |
Weight
(Kg) |
| Shape |
Area
(m 2 ) |
Stroke
(mm) |
Frequency of Stroke
(r/min) |
| JT0.57-1 |
Trapezoid |
0.57 |
8.5_12
10_17
12-21 |
80-180 |
<6 |
1-2 |
≥0.05 |
1.5-3 |
1.5 |
1550*780*1530 |
610 |
| JT1-1 |
Trapezoid |
1.04 |
<10 |
2-3 |
2.5-5 |
2.2 |
2270*1110*1890 |
900 |
| JT2-2 |
Rectangle |
2.28 |
<10 |
2-4 |
5-10 |
3 |
3225*1550*2050 |
1640 |
| JT3-1 |
Trapezoid |
3 |
12-30 |
50-125 |
<10 |
3-6 |
7.5-15 |
5.5 |
2745*2000*3030 |
3085 |
| JT4-2 |
Rectangle |
4 |
25-57 |
<25 |
4-8 |
8-20 |
7.5 |
4240*1990*2750 |
3098 |
| JT4-2S |
Rectangle |
4 |
25-57 |
<25 |
4-8 |
8-20 |
4×2 |
4240*19908*2750 |
3500 |
| JT5-2 |
Trapezoid |
4.86 |
12-30 |
<10 |
3-6 |
12-25 |
7.5 |
3600*2000*2600 |
4500 |
Audited Supplier 
){kind=link}
){kind=link}