High performance mineral separator flotation machine for sale
How is works: When flotation machine works, slurry is inhaled from the bottom of the cell to the space between impellers. Meanwhile, the low-pressure air send by fan is sent to this area through the air distributor in the hollow shaft. After sufficient mixing, the slurry is pushed out by the impeller, and then goes to the whole cell. When the froth rises to the stable level, after the enrichment processing, froth overflows to the froth trough from the overflow weir. Another part of ore slurry flows to lower part of impeller for the re-mix with air. The remained slurry flows to the next cell until becomes tailing.
XCF and KYF are enforced aeration flotation machine. It has a smaller diameter of impeller, thus lower peripheral speed, saving 30%-50% of power. Because and air distributor is equipped in the tank, air is evenly dispersed. The impeller acts as a centrifugal pump, so as to make the solid particles suspending. The tank is made as U type, reducing sand settlement to the least. Due to reasonable design of the impeller structure and the impeller space,impeller wearing is even, so, the service life of the impeller and stator are extended. Model KYF is unable to spontaneously suck slurry, while has low power consumption. In contrast, model XCF has the ability to automatically suck slurry, and may be allocated horizontally without need for foam pump, but consumes more power than model KYF. Therefore, model XCF and model KYF are combined into a set, i.e., XCF as the sucking tank, and KYF as the direct tank. The combined set can be arranged horizontally without foam pump either.
Performance features:
1. Lower power consumption and saving 30-50% energy.
2. Well floated particles and higher recovery.
3. Light wearing of the spare parts so the service life of them are extended.
XCF Cell Features:
It has the similar structure and performance with KYF cells and only the difference is the stator on the impeller to be a negative pressure zone. Pulp is sucked automatically but higher power consumption.
Note:
1. Mechanical agitation, no air inhalation but pulp sucked automatically.
2. It is combined with KYF Cells to be group as a suction cell.
KYF Cell Feature:
1. Impeller is a cone shape with the backward inclined blades, strong agitation and simple structure.
2. Many air distributors are equipped on the impeller cavity, air disperse very well and well mixing of the air and pulp.
3. U type tank is made and lower sand settlement.
4. The diameter of the impeller is smaller thus lower peripheral speed.
Note:
1. Mechanical agitation, no air inhalation and no pulp sucked automatically.
2. It is combined with XCF Cells as the direct cells.
Detail technical parameters please contact with us to get.
FAQ:
Q:You are factory or trade company?
A:We are the biggest gravity separator machine manufacturer in China.we have 7 modem
workshops, one sample test workshop and one office building.
Q:If your company can provide whole line machine?
A:Yes, From washing to get final gold bar.
Q:What's capacity you can provide?
A:All machine can customization,we can provide from 20t/h-300t/h.
Q:If can arrange engineer come to worksite for installation?
A:Yes.
If you have mining plant such as Tin,Tantalum-Niobium,Chrome,Monazite,copper,manganese,zinc ore
in Africa or Southeast Asia or central South America,
but haven't money,we can introduce investor to you.
or if you have ore, but have't found buyer,
we can introduce buyers to you.
For more details, please don't hesitate to Contact us, you can send us inquiry as below, we will reply you within 24hours.
Audited Supplier 
How is works: When flotation machine works, slurry is inhaled from the bottom of the cell to the space between impellers. Meanwhile, the low-pressure air send by fan is sent to this area through the air distributor in the hollow shaft. After sufficient mixing, the slurry is pushed out by the impeller, and then goes to the whole cell. When the froth rises to the stable level, after the enrichment processing, froth overflows to the froth trough from the overflow weir. Another part of ore slurry flows to lower part of impeller for the re-mix with air. The remained slurry flows to the next cell until becomes tailing.
){kind=link}
){kind=link}